Supercritical Fluid Extraction Search Engine - Infinity Supercritical CO2 Extraction Publications Search Engine - Cannabis Industry - Publications On Demand - Real Time Browser Display
This SDR - Spinning Disc Reactor and Cavitation Reactor search was updated real-time via Filemaker on:SDR - Spinning Disc Reactor and Cavitation Reactor Contents List
Search Completed. Publication Name:
Page Number: 001
| PDF Text:|
General Classification of SONOREACTORS
We have a number of options to address flow-through Sonochemistry. As you can see there are many elements we can use in our chamber designs. We can offer complete systems built for your needs or for clients with the capability to construct the chamber parts we may also consider selling just the ultrasonic components.
In addition to some standard components you will find that we are offering some very unique technology. For example if you decide on the very high surface power density probe solution please note that ours is the highest power system available. None of the leading industry brands are offering the same level of power output to the liquid. This is very important for some Sonochemical testing where you need to test low power as well as very high power .
Our Pipe-Clamp solution is a technology that will only function with our MMM generators. We can design clamps to fit nearly any size pipe and drive 1 to 5 converters and clamp assemblies from one generator.
SONOREACTORS Group A: HVPD
-High volumetric (typically 5 to 50 W/dm3) and low surface power density (typically 0.5 to 2 W/cm2)
-Large radiating surface/s (transducer arrays)
-Moderate or high volume-power-density: HVPD
-Multifrequency and single frequency systems
SONOREACTORS Group B: HSPD
-High surface-power-density of ultrasonic radiation: HSPD Typically 100 W/cm2 or higher (until 500 W/cm2)
-Small radiating surface (and very high intensity of radiation) -Single frequency systems
We need to learn more about your application to give better advice on the equipment that will best meet your needs. Please tell us: What kind of liquid material you wish to treat? Do you prefer to use the effects of even cavitation or a combination high acoustic power plus cavitation to break particles? Will you need to treat a large volume or small volume? Is your need for batch treatment or continuous flow?
Please visit our website for more details and have a look at our production line technology, or contact us directly with any inquiries.
Homepage: http://www.mpi-ultrasonics.com E-mail: firstname.lastname@example.org email@example.com, firstname.lastname@example.org
|SUPERCRITICAL CO2 EXTRACTOR FOR SALE: 5L, 10L and 20L - 2,000 psi Complete Supercritical Fluid Extraction System - closed loop. Our systems are made at our fabrication shop in the state of Washington. Systems available: 5L, 10L, 20L, 100L, and larger custom. Typical build time is 2 weeks. This is not a Apeks Supercritical or Waters Supercritical CO2 Fluid Extraction System. We believe it is a better system, since we use 1/2 inch tubing for the CO2 flow, which is 4 times the flow rate of a Apeks, and up to 64 times the flow rate of a Waters system. We believe the result is faster processing time and better yield from increased exposure to CO2 solvent. Perfect for extraction of terpenes, trichomes, and Cannabinoids. Supercritical CO2 Fluid Extraction is a art, and the operator must have experience and training to obtain results. Go to website|
Search Engine Contact: email@example.com